Re: Luna as Surrounds mounted horizontally?
Thanks, the fronts were only my concern on Lunas for power needed, not axis. My axis concern is the sides/rears where I am close and may not be able to angle them down enough to get within 30 degrees. They will be mounted about 7-7.5 feet high due to doorway and windows. I will take some measurements today as I found a calculator online that will show me the offset from axis. That is why the Lunas looked appealing as at least with most ribbons they have wide dispersion this if I mount them horizontal I could easily stay within an acceptable off axis position. Sorry for the confusion, this room and purchase are driving me nuts as I want to make sure I get this as good as I can since the speakers will be a decent sized spend for me.
Update:
OK I did some rough measurement and without angling the speakers the rears are 45 degree below axis, the right surround is about 34 degrees and the left surround is 27 degrees. The one wall bracket I am looking at has +12/-20 degree tilt so I assume I would subtract ~20 degrees from my calculations.
Last edited by hdkeith; 08-09-2022 at 02:57 AM.
Denon X7200WA, Monolith 9X, Dual PSA V1800 subs, Klipsch RP-280F/RS-62ii Front stage, RS-35/25 sides/rears and RP-140SA Elevations.