Too many mixed reviews and old threads with mounts that are no longer available. Which ones are you guys using for your 200's? mine will be attached to the studs.
|
Too many mixed reviews and old threads with mounts that are no longer available. Which ones are you guys using for your 200's? mine will be attached to the studs.
B0SE WB-3 kit for me, see here:
http://forum.ascendacoustics.com/sho...*-in-the-house
https://www.amazon.com/Definitive-Te.../dp/B001UAFJ0K
I don't use them but I found these.
i went with these after reviews they can hold at least 15lbs comfortably.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I used these to mount them horizontally and they work and look excellent https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
I have used these and they work great: http://www.cotytech.com/content-prod...r_sp_os02.html
I used these to mount my HTM 200's from the ceiling. I had to alter them to allow the speaker wire to pass through, but they are perfect in my application.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
You can see my install here: http://forum.ascendacoustics.com/sho...4317#post54317
I am going to buy two pair of HTM-200 SE very shortly and also trying to understand mounting options. One pair will be in the kitchen at eye level, one pair will be in the livingroom on side walls just slightly behind the couch with the top about 7 ft high. I am thinking that:
- these two locations are the ideal ones
- flush mounting, or nearly so with slight downward angle, would be ideal for sound
- the easiest way I've seen is upside down with picture hanging kits, like this very well-done instruction: http://www.avsforum.com/forum/89-spe...9018?_k=cjktpo
Am I right on all three counts? Any tips? The only thing I'm thinking I'll need to be careful on, is popping the speaker wire through the wall at just the right point to get into the back of the speaker without impacting its ability to rest flush.
Thanks.
Tai
I'm going to be mounting HTM-200 SE on my walls, trying to stay basically flush, within the next few weeks. Then maybe I'll post pix of my system!
I think my above post about it didn't get noticed maybe... The mounting method I linked looks pretty good to me; bottom line question is, is there any reason not to put these upside down?
Thanks!
Tai