Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Any concensus on good HTM 200 wall mounts?

  1. #1
    Join Date
    Jul 2016
    Posts
    2

    Default Any concensus on good HTM 200 wall mounts?

    Too many mixed reviews and old threads with mounts that are no longer available. Which ones are you guys using for your 200's? mine will be attached to the studs.

  2. #2

    Default Re: Any concensus on good HTM 200 wall mounts?


  3. #3
    Join Date
    Mar 2016
    Location
    The Mile High State
    Posts
    37

    Default Re: Any concensus on good HTM 200 wall mounts?

    https://www.amazon.com/Definitive-Te.../dp/B001UAFJ0K

    I don't use them but I found these.

  4. #4
    Join Date
    Jul 2016
    Posts
    2

    Default Re: Any concensus on good HTM 200 wall mounts?

    i went with these after reviews they can hold at least 15lbs comfortably.

    https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

  5. #5

    Default Re: Any concensus on good HTM 200 wall mounts?

    I used these to mount them horizontally and they work and look excellent https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

  6. #6
    Join Date
    Aug 2003
    Location
    USA
    Posts
    3,867

    Default Re: Any concensus on good HTM 200 wall mounts?

    Quote Originally Posted by photony83 View Post
    Too many mixed reviews and old threads with mounts that are no longer available. Which ones are you guys using for your 200's? mine will be attached to the studs.
    I have used these and they work great: http://www.cotytech.com/content-prod...r_sp_os02.html
    .
    .
    .
    Good Sound To You!

    David Fabrikant
    www.ascendacoustics.com

  7. #7
    Join Date
    Feb 2008
    Posts
    116

    Default Re: Any concensus on good HTM 200 wall mounts?

    I used these to mount my HTM 200's from the ceiling. I had to alter them to allow the speaker wire to pass through, but they are perfect in my application.

    https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

    You can see my install here: http://forum.ascendacoustics.com/sho...4317#post54317

  8. #8
    Join Date
    Jun 2016
    Posts
    12

    Default Re: Any concensus on good HTM 200 wall mounts?

    I am going to buy two pair of HTM-200 SE very shortly and also trying to understand mounting options. One pair will be in the kitchen at eye level, one pair will be in the livingroom on side walls just slightly behind the couch with the top about 7 ft high. I am thinking that:
    - these two locations are the ideal ones
    - flush mounting, or nearly so with slight downward angle, would be ideal for sound
    - the easiest way I've seen is upside down with picture hanging kits, like this very well-done instruction: http://www.avsforum.com/forum/89-spe...9018?_k=cjktpo

    Am I right on all three counts? Any tips? The only thing I'm thinking I'll need to be careful on, is popping the speaker wire through the wall at just the right point to get into the back of the speaker without impacting its ability to rest flush.

    Thanks.

    Tai

  9. #9
    Join Date
    Jun 2016
    Posts
    12

    Default Re: Any concensus on good HTM 200 wall mounts?

    I'm going to be mounting HTM-200 SE on my walls, trying to stay basically flush, within the next few weeks. Then maybe I'll post pix of my system!

    I think my above post about it didn't get noticed maybe... The mounting method I linked looks pretty good to me; bottom line question is, is there any reason not to put these upside down?

    Thanks!

    Tai

  10. #10
    Join Date
    Mar 2011
    Location
    NW Pennsylvania
    Posts
    456

    Default Re: Any concensus on good HTM 200 wall mounts?

    Quote Originally Posted by taigovinda View Post
    I'm going to be mounting HTM-200 SE on my walls, trying to stay basically flush, within the next few weeks. Then maybe I'll post pix of my system!

    I think my above post about it didn't get noticed maybe... The mounting method I linked looks pretty good to me; bottom line question is, is there any reason not to put these upside down?

    Thanks!

    Tai
    I hung HTM-200s the same way and it worked fine. Since I was in an apartment I left my speaker wire on the outside of the wall, covered it with masking tape and painted it the color of the wall. Looked good to me!
    Nate

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •