Page 2 of 2 FirstFirst 12
Results 11 to 16 of 16

Thread: Non-Destructive ceiling mounts for HTM-200's

  1. #11
    Join Date
    Nov 2021
    Posts
    3

    Default Re: Non-Destructive ceiling mounts for HTM-200's

    Quote Originally Posted by racrawford65 View Post
    those should work and hopefully screw holes are aligned with those in the HTM's...otherwise you may need to drill additional holes.
    I'm trying really hard to avoid that. Drilling into speaker cabinets gives me the willies.

    My backup right now is two of these (https://www.amazon.com/VideoSecu-Uni..._t3_B008J56UH0). My mounting would just have to be more precise.

  2. #12
    Join Date
    May 2015
    Location
    Houston, Texas
    Posts
    1,517

    Default Re: Non-Destructive ceiling mounts for HTM-200's

    Sorry it wasn't clear - I meant drilling holes in the bracket that mounts to the speakers.
    You're backup brackets may not support the HTM's...you may need 2 per speaker.

  3. #13
    Join Date
    Nov 2021
    Posts
    3

    Default Re: Non-Destructive ceiling mounts for HTM-200's

    Quote Originally Posted by racrawford65 View Post
    Sorry it wasn't clear - I meant drilling holes in the bracket that mounts to the speakers.
    You're backup brackets may not support the HTM's...you may need 2 per speaker.
    Got it. Yeah, if the brackets are close but not quite there, I'm going to try to Dremel them a bit.

    The backups would require a pair per speaker. So I'd actually have to do some measuring and use some precision. I'm trying to start with the easiest solution and work down. Absolute worse case, I could building something to work. Just kinda hoping this is a drill-only install.

  4. #14
    Join Date
    May 2015
    Location
    Houston, Texas
    Posts
    1,517

    Default Re: Non-Destructive ceiling mounts for HTM-200's

    yeah, a Dremel would work too. Looking at them again, it looks like holes for the mount to speaker are elongated so perhaps no modification will be needed. On the back of the HTM, it looks to be about 2" center to center for the existing mounting holes by a quick measurement.

  5. #15
    Join Date
    May 2007
    Location
    Stouffville,Ont..
    Posts
    553

    Default Re: Non-Destructive ceiling mounts for HTM-200's

    Those have a 10lb limit....idk...if that was my decision... I'd want something more heavy duty....but I'm anal that way...I reckon.
    [SIZE=1][COLOR="#FF0000"][B][I]Speakers 5.1.2:[/I][/B][/COLOR][B][/B][SIZE=1][/SIZE] TitanTowers v2 & STC(RAAL v2), MA CP-WT&CT260
    [COLOR="#FF0000"][B]Sub:[/B][/COLOR] Funk Audio 18.0 SantosRW[/SIZE]
    [SIZE=1][COLOR="#FF0000"][B][I]Source:[/I][/B][/COLOR] Denon X3800H, Oppo BDP 103D, UBK-90 4K & LG B9 65"[/SIZE]
    [SIZE=1][B][COLOR="#FF0000"]Office 2.0:[/COLOR][/B][/SIZE] Philharmonic True Mini, Fosi TB10D via Wiim mini.

  6. #16
    Join Date
    Feb 2023
    Posts
    2

    Default Re: Non-Destructive ceiling mounts for HTM-200's

    Hi. What mounts did you end up using to mount your 200's from the ceiling?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •