Results 1 to 3 of 3

Thread: Anthem / ARC question

  1. #1
    Join Date
    May 2015
    Location
    Houston, Texas
    Posts
    1,483

    Default Anthem / ARC question

    Anyone ever try using ARC Genesis to remove the calibration from their AVM60 or MRX x20?

    If so, any way to confirm it was actually removed?

    I'm trying this on my MRX720 and Genesis goes through the removal. However, I still see ARC ON or OFF in the input setups and that it was loaded in the system info. I would assume the input would show N/A if ARC cal was removed and there'd be no file name or date in the system info.

    Any help would be appreciated.

    (I've also sent Anthem TS an email and posted similar question over on AVS).

  2. #2
    Join Date
    Aug 2003
    Location
    Manhattan Beach, California
    Posts
    7,105

    Default Re: Anthem / ARC question

    Interesting question. I haven't tried.

    Please let us know what Anthem tech support has to say.
    -curtis

  3. #3
    Join Date
    May 2015
    Location
    Houston, Texas
    Posts
    1,483

    Default Re: Anthem / ARC question

    will do. although I'm sure they are swamped with being short staffed/lockdown (Covid/Ontario), what seems like multiple issues with the new AVP/AVR, and, rumor has it, supply issues where appears they've indefinitely delayed the AVM90.

    The only work around for me, so far, was factory reset to remove ARC cal. Still a no go after the reset to upload an ARC Cal and then remove (assuming one can tell it is removed as per my 1st post).

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •