Sierra-2 Upgrade instructions with video!

[davef]

Some really great tips here on removing a stuck woofer. Another good one is to use a cheap dental pick.

[RMW]

Hi All - I’m trying to switch my EX and LX enclosures. I prefer the natural finish my EX speakers have, so would like to swap out the espresso finished cabinets my LXs have since the LX are in my main listening room. Anyway, I’m having a heck of a time removing one of the connectors from one of the LX woofers. Any tips to get it to budge? I’m trying not to use too much force so I don’t break anything. I’ve done a few upgrade kits and don’t recall having this issue much difficulty before.

As an FYI the LXs are factory and not from an upgrade kit.

Thanks!

[racrawford65]

When I did my Towers, I had a couple of tough connectors. I used needle nose pliers to wiggle it back and forth (meaning side to side) and then to pull it off. On one, I also applied a bit of pressure with these pliers on the sides to help loosen.

I also used these to compress a couple of connectors when reassembling as they were too loose on the new drivers.

I didn’t have one, but maybe a very fine pick (likely l-shaped) to insert at the top of the connector between it and the spade to break loose

[davef]

Hi All - I’m trying to switch my EX and LX enclosures. I prefer the natural finish my EX speakers have, so would like to swap out the espresso finished cabinets my LXs have since the LX are in my main listening room. Anyway, I’m having a heck of a time removing one of the connectors from one of the LX woofers. Any tips to get it to budge? I’m trying not to use too much force so I don’t break anything. I’ve done a few upgrade kits and don’t recall having this issue much difficulty before.

As an FYI the LXs are factory and not from an upgrade kit.

Thanks!

Please feel free to give us a call at the office tomorrow. We have a lot of little tricks to remove the faston terminals.

[RMW]

I spoke with Dina this afternoon and she gave me a couple of pointers. I now have LXs in natural and EXs in Espresso. ��

Thanks!
Ryan