Might be useful to post those pointers here in case others have same issue
Printable View
Might be useful to post those pointers here in case others have same issue
Just completed an upgrade to the LXs from the Sierra-2s. The most difficult step was step1. Removing the female connectors from the tweeter terminals was tough, especially the negative connection. I wiggled and wiggled as instructed to no avail. I went to Google and found the trick: use a thin safety pin or allen key (we have a set that gets microscopically thin and used this) and push it into the hole in the female connector. This plus a slight wiggle will free the stuck connections. Three of the four connections needed this approach. After this everything was just as the instructions suggested.
The new upgrades are now breaking in but already sound sweeeeet!