Wall Mounts for HTM-200 SE

[edgeh2o]

Hey guys,

Just moved into a house, time to get surrounds to compliment my Sierra-1 LCR setup. HTM-200 SE pair seem like the obvious choice (budget is a factor, but also weight). I'll be mounting them to the left and right walls, slightly being the listening position, about 2' above ear level.

What is the best way to wall mount them? Best hardware/mounts to use? Any tips and input would be great to hear.

Forgot to add, I can't install them directly to the left and right of the listening position, so I don't want to flush mount them. I'd like to be able to angle them directly towards the listening position. Seems like the Omni 20 would be perfect, but they don't sell them anymore...but they might?

[Johnny_Mac_III]

I use these:

http://www.amazon.com/VideoSecu-Clamping-Mounting-Surrounding-MS56B/dp/B000X9O8SI/ref=sr_1_2?ie=UTF8&qid=1439749571&sr=8-2&keywords=speaker+mounts

form my HTM-200 SEs

[edgeh2o]

I use these:

http://www.amazon.com/VideoSecu-Clamping-Mounting-Surrounding-MS56B/dp/B000X9O8SI/ref=sr_1_2?ie=UTF8&qid=1439749571&sr=8-2&keywords=speaker+mounts

form my HTM-200 SEs

I just wish those had a lip in the front or were able to screw into the HTM-200. I plan on tilting them downwards a little, and I'd be scared of the HTM-200 inching its way down over time.

[davef]

This brackets work very well with HTM-200SE and CBM-170SE:

http://www.cotytech.com/content-product_info/product_id-2280/wall_or_ceiling_bracket_for_small_satellite_speake r_sp_os02.html

They attach directly into the inserts on the back of the speakers. I have personally tested these brackets :)

[Johnny_Mac_III]

On those Cotytech mounts, can the arm be adjusted so that the back of the speaker can be closer to the wall?

[davef]

On those Cotytech mounts, can the arm be adjusted so that the back of the speaker can be closer to the wall?

unfortunately, it cannot.

[eyecatcher]

I have my eyes on these but I haven't purchased them yet. https://www.thinkvp.com/products16-43/BookshelfSpeakerMountsPair

[GPeaslee]

I use the Peerless SKP811 mounts which come in black or white. They work very well, but you have to carefully tighten them with a big wrench to set the angle. They are available everywhere and are inexpensive too.