PDA

View Full Version : DIY Enclosures vs Parts Express



natetg57
12-14-2013, 04:27 AM
What do you all think of this enclosure vs building one from scratch? The opening for the driver is the right size.

http://www.parts-express.com/knock-down-mdf-30-cu-ft-subwoofer-cabinet-for-dayton-audio-15-reference-series-ho-subw--300-7078

rsmt2000
12-16-2013, 09:42 AM
What do you all think of this enclosure vs building one from scratch? The opening for the driver is the right size.

http://www.parts-express.com/knock-down-mdf-30-cu-ft-subwoofer-cabinet-for-dayton-audio-15-reference-series-ho-subw--300-7078


If you are planning to use this to build a 15 inch sealed rythmik, this could be a show stopper.


The feet may be changed, but the height should not be reduced. Extra height is required if drivers
are not recessed, so the clearance remains the same.

from
http://rythmikaudio.com/download/DS1500s_sub_plan.pdf

natetg57
12-16-2013, 09:50 AM
If you are planning to use this to build a 15 inch sealed rythmik, this could be a show stopper.



from
http://rythmikaudio.com/download/DS1500s_sub_plan.pdf

I think that's for the downward firing plans

thelaw612
12-24-2013, 07:46 AM
Just seeing this but I emailed Brian about those enclosures a few months ago and he said either the 3cu. (E15 clone) or 4 cu. (F15) would be fine as long as the driver and baffle cuts work. Hope this helps.