MALC_345
01-14-2013, 01:38 PM
Hi all -
I was wanting to get fellow Ascend owners' opinion (specifically Sierra 1 owners) thoughts on placement of their speakers. For my particular HT room, I would only be able to locate the speakers 12 inches from the back wall & 10 inches from the side wall. My concern is the fact that the Sierra 1s are back ported. I'm thinking of pairing these Sierra 1s with the Sierra Horizon Center since I want the BEST center on the market ;) (My usage is pretty much only HT with music being from Blu-Ray concerts). How flexible is the Sierra 1s with placements (especially since the Sierra 1 that will be on the right side of our PJ screen will be beside a brick wall).
I have even considered the HTM200 SE for the front soundstage with the Sierra Horizon Center, but I know that the Sierra 1s are on a different level and the whole 'upgrade-itis bug' may hit me if I went that route (but if it is more practical because of speaker placement issues, that may be the only solutions). Any thoughts on this would be greatly appreciated. Pics below. ;)
Pic of Left side of Wall (Actually, we are having our contractor put up a wall (sheetrock, stud joints, etc) over the windows on the back wall where my 'make-shift' PJ screen is located now. :D):
http://farm9.staticflickr.com/8370/8380793819_15edcdfb30.jpg (http://www.flickr.com/photos/90809995@N05/8380793819/)
Pic of Right Side of Wall:
http://farm9.staticflickr.com/8376/8381878640_e12b9f2c7c.jpg (http://www.flickr.com/photos/90809995@N05/8381878640/)
Pic of HT Room:
http://farm9.staticflickr.com/8511/8380791645_0188e13831.jpg (http://www.flickr.com/photos/90809995@N05/8380791645/)
The dimensions of the room are length: 11.4ft & width: 9.3ft (& cathedral ceiling).
I was wanting to get fellow Ascend owners' opinion (specifically Sierra 1 owners) thoughts on placement of their speakers. For my particular HT room, I would only be able to locate the speakers 12 inches from the back wall & 10 inches from the side wall. My concern is the fact that the Sierra 1s are back ported. I'm thinking of pairing these Sierra 1s with the Sierra Horizon Center since I want the BEST center on the market ;) (My usage is pretty much only HT with music being from Blu-Ray concerts). How flexible is the Sierra 1s with placements (especially since the Sierra 1 that will be on the right side of our PJ screen will be beside a brick wall).
I have even considered the HTM200 SE for the front soundstage with the Sierra Horizon Center, but I know that the Sierra 1s are on a different level and the whole 'upgrade-itis bug' may hit me if I went that route (but if it is more practical because of speaker placement issues, that may be the only solutions). Any thoughts on this would be greatly appreciated. Pics below. ;)
Pic of Left side of Wall (Actually, we are having our contractor put up a wall (sheetrock, stud joints, etc) over the windows on the back wall where my 'make-shift' PJ screen is located now. :D):
http://farm9.staticflickr.com/8370/8380793819_15edcdfb30.jpg (http://www.flickr.com/photos/90809995@N05/8380793819/)
Pic of Right Side of Wall:
http://farm9.staticflickr.com/8376/8381878640_e12b9f2c7c.jpg (http://www.flickr.com/photos/90809995@N05/8381878640/)
Pic of HT Room:
http://farm9.staticflickr.com/8511/8380791645_0188e13831.jpg (http://www.flickr.com/photos/90809995@N05/8380791645/)
The dimensions of the room are length: 11.4ft & width: 9.3ft (& cathedral ceiling).