HTM200 and BTech BT77

[chas]

Has anyone tried mounting the HTM200 horizontally in a BT77 mount? The specs on the 200SE shows a length of 11'' which is also listed as the max on the BT77...just wondering if it would squeeze in without problems.

[ccotenj]

good question...

if you don't get an answer by the weekend, pm me and i'll try it for you... :)

[chas]

Thanks :)

[ccotenj]

didya ever get an answer on this?

inquiring minds want to know? :)

[chas]

No I never did find an answer to this...

[rhkelly]

I know that this thread is old, but the HTMs are a hair too long to fit the BT77 mount horizontally. If you can find a longer adjusting bolt, it should work. We're barely talking 1/8" (2mm). The adjusting bolts screw out all of the way, so it shouldn't be too tough to find a 1/2" longer bolt.

[davef]

I know that this thread is old, but the HTMs are a hair too long to fit the BT77 mount horizontally. If you can find a longer adjusting bolt, it should work. We're barely talking 1/8" (2mm). The adjusting bolts screw out all of the way, so it shouldn't be too tough to find a 1/2" longer bolt.

Here is a link to another bracket that will work well for wall mounting any of our speakers horizontally (it is a front clamping bracket)

http://www.sanus.com/us/en/products/visionmount/speaker-mount/WMS2