View Full Version : I bi-wired my CMT-340's!!
Well as long as it looks cool. :-)
JH
curtis
01-18-2004, 11:30 AM
Some of you asked for pics:
Here are the parts:
http://www.thechangs.us/cableparts.JPG
Finished speaker end of the cable:
http://www.thechangs.us/finished_cable.JPG
Plugged in to the speaker:
http://www.thechangs.us/plugged_in.JPG
-curtis
Cool looking wire you got there, Curtis!
Bighitter
01-19-2004, 12:09 AM
If you don't mind where did you get the cable and how much did it run you? I believe that particular wire is CL3 rated correct?
curtis
01-19-2004, 12:43 AM
I am not sure if it is CL3 rated. I got it from www.markertek.com for 69cents/ft.
Total cost for my front three speakers, 2x10' and 1x7', was less than $70.....the cable, techflex, shrink wrap, banana plugs.
-curtis
Bighitter
01-19-2004, 02:04 AM
If nothing else atleast they make everything look nice. Now I just need to verify if they are CL3 or not, thanks for the info.
BradJudy
01-19-2004, 04:36 AM
Bighitter, I doubt it is as CL3 isn't mentioned on the Canare site nor is it printed on the cable itself (I use 4S8 for speaker cable).
Bighitter
01-19-2004, 05:21 AM
Well thanks for the info, guess I will still have to go with the sound king wire.
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.