View Full Version : xr57 xover for 340se/200 combo?
Sam1000
10-13-2006, 03:52 PM
Can Panny xr57 Xover the mains and the surrounds at different frequency? I have Ascend 340SE fronts which I would like to Xover at 60 or 80 and have Ascend 200 surrounds which I would like to Xover at either 100 or 120. Also, for the folks who are using the Ascend/xr57 combination, do you recommend it?
Thanks
Sam.
curtis
10-13-2006, 04:22 PM
There is no set rule.....play around with it and see what you like best.
I would bet that either 80hz or 100hz would sound best.
bikeman
10-13-2006, 04:54 PM
There is no set rule.....play around with it and see what you like best.
I would bet that either 80hz or 100hz would sound best.
I have the xr55 and 340's & 200's. I xover @ 80hz for DVD's and don't use the sub for CD's. When I briefly ran the 200's as mains, I xovered @ 100hz. As Curtis says, there's no rule. Every room is different. Experiment and see what works best for you.
David
Sam1000
10-13-2006, 05:08 PM
My question was whether the main and surrounds can have different xover settings using xr57??
-Sam
PS - SOmeone at AVS answered my question. The answer is "NO" :-(
Now, do I have to xOver at 100+ because of 200s?? Looks like it.
bikeman
10-13-2006, 06:34 PM
PS - SOmeone at AVS answered my question. The answer is "NO" :-(
Now, do I have to xOver at 100+ because of 200s?? Looks like it.
Not at all. I have no qualm about using 80hz as a xover with the 200's as surrounds. Are you listening to MC music?
David
Sam1000
10-13-2006, 08:47 PM
Thanks David. I'll try 80hz. I don't listen to MC music.
Not at all. I have no qualm about using 80hz as a xover with the 200's as surrounds. Are you listening to MC music?
David
I occasionally listen to DVD-A material, have 200 surrounds, and my XO is set to 80hz. I have tried 100hz and can hear no noticable difference between the two.
Powered by vBulletin® Version 4.2.4 Copyright © 2024 vBulletin Solutions, Inc. All rights reserved.