Originally Posted by
racrawford65
If Curtis isn't able to help you with miniDSP products, I can.
I use a Flex in my HT system, mainly for loading ezBEQ filters and integrating my Crowson tactile devices. I let my AVM90 handle the subs (eq, integration, x-over, etc.)
When I had a separate 2 channel system, I also used a Flex in this system. I ran LR outputs from my processor (Rogue RP5) to the Flex, and then outputs 1 & 2 to amp L&R, output 3 to sub 1, output 4 to sub 2. In the Flex, I did all the bass management & sub integration (along with REW+UMIK1). I also had 4 presets in the Flex, 2.1 with a house curve, 2.1 with bass eq'ed flat, 2.0 with bass EQ'ed, 2.0 w/o EQ. Worked great.
Curtis - I just looked at the manual for his sound card. It looks like the center/sub jack on the card carries both signals and one would use a y-splitter to connect to center & sub jack on receiver. So, can have both AFAIK.