Results 1 to 4 of 4

Thread: HTM-200SE for Atmos..what in room response are you getting?

  1. #1
    Join Date
    Sep 2011
    Posts
    5

    Default HTM-200SE for Atmos..what in room response are you getting?

    Hi guys!
    So the 200SE is listed as 74Hz - 22kHz +/- 3dB.
    What are you guys getting in room in terms of bottom end, specially if using it as ATMOS speakers.
    For example, if using Audyssey, is it detecting it as 80hz or similar? Or even better if you did some measurements.
    I want to upgrade from my Polk OWM3s as they sound a bit thin and I dont want to have to crossover higher than 80Hz which the Polk force me to as they need to be crossed over around 120-150Hz
    So far I have narrowed down my search to:
    HTD Q65 outdoor speakers (cheapest option)
    Ascend 200SE (mid option)
    Monitor Audio Bronze 50 (most expensive).

    All the options above have a threaded insert so I can easily replace my current Polks with either of those.

  2. #2
    Join Date
    May 2015
    Location
    Houston, Texas
    Posts
    1,517

    Default Re: HTM-200SE for Atmos..what in room response are you getting?

    Those specs look about what I am seeing in my room with ARC Genesis using the 200SE's as front / rear ATMOS speakers (mounted high on wall, not on ceiling). ARC sets the cross-over at 80.
    * LG OLED65E6P, BenqHT2050A
    * Anthem AVM90, Rogue ST100, VTV Pascal 7 ch
    * Sierra Towers/Horizon (all ELX RAAL), S2EXv2 surrounds, HTM200SEx4 heights, Rythmik E15HPx2
    * VPI Classic 1+ (VTA & Fatboy Gimbal), PE Eagle/RR, VAS NOVA, Soundsmith Paua, Manley Chinook, Bob's Devices SUT, SugarCube 1 mini
    * Oppo 203 & 103D, EverSolo DMP-A6
    * miniDSP Flex, Audiosensibility & Blue Jeans cables, Symposium & Isoacoustics, GIK
    * For RDJ: Anthem MRX720, Sierra LX, Luna Duo v2 center, CXNv2, TBD

  3. #3
    Join Date
    Sep 2011
    Posts
    5

    Default Re: HTM-200SE for Atmos..what in room response are you getting?

    Quote Originally Posted by racrawford65 View Post
    Those specs look about what I am seeing in my room with ARC Genesis using the 200SE's as front / rear ATMOS speakers (mounted high on wall, not on ceiling). ARC sets the cross-over at 80.
    I am guessing since mine will be on a ceiling (well unfinished) it may not get the same reinforcement as yours wall mounted..
    Thank you!

  4. #4
    Join Date
    May 2015
    Location
    Houston, Texas
    Posts
    1,517

    Default Re: HTM-200SE for Atmos..what in room response are you getting?

    You're welcome. My ceiling is tiered, which is why I chose to wall-mount.
    * LG OLED65E6P, BenqHT2050A
    * Anthem AVM90, Rogue ST100, VTV Pascal 7 ch
    * Sierra Towers/Horizon (all ELX RAAL), S2EXv2 surrounds, HTM200SEx4 heights, Rythmik E15HPx2
    * VPI Classic 1+ (VTA & Fatboy Gimbal), PE Eagle/RR, VAS NOVA, Soundsmith Paua, Manley Chinook, Bob's Devices SUT, SugarCube 1 mini
    * Oppo 203 & 103D, EverSolo DMP-A6
    * miniDSP Flex, Audiosensibility & Blue Jeans cables, Symposium & Isoacoustics, GIK
    * For RDJ: Anthem MRX720, Sierra LX, Luna Duo v2 center, CXNv2, TBD

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •