Dave,
Thanks for posting the kit info on the EX product page!
|
Dave,
Thanks for posting the kit info on the EX product page!
Ed
* Sierra-2EX's W/V2 crossover upgrade
* (2) Rythmik F12's
* Parasound Halo P6
* Audio by Van Alstine DVA-M225 Monoblock Amps
* MiniDSP 2x4HD For Sub calibration
*World's Best Cables Canare 4S11 speaker cables
I've been following the diamond thread in anticipation! This came together quicker than expected. Great work Dave!!
Some questions:
What tools/skills are required to perform the upgrade from S2 to S2EX? Similar to the S1->S2 upgrade kit? Will there be an option to ship our S2 to Ascend to have you do the upgrade? And if so, how will self-upgrade vs factory upgrade affect warranty?
Should be the same as doing the S1 to Nrt upgrade, only you are swapping woofers vs tweeters as well as crossovers. You should have a regular Phillips (+) head screwdriver and correctly sized hex socket/open end wrench for the speaker terminal connections.
See here: http://forum.ascendacoustics.com/sho...ons-with-video!
Just don't remove the tweeter, only the woofer!
Last edited by Mag_Neato; 07-26-2019 at 08:12 AM.
Ed
* Sierra-2EX's W/V2 crossover upgrade
* (2) Rythmik F12's
* Parasound Halo P6
* Audio by Van Alstine DVA-M225 Monoblock Amps
* MiniDSP 2x4HD For Sub calibration
*World's Best Cables Canare 4S11 speaker cables
S2 to S2EX is rather simple, I would say only skills required are some patience, somewhat dexterous hands, and experience with a screwdriver. Basically, you will need to first remove the woofer, then the tweeter, and then the crossover. Then install the new crossover, reinstall the tweeter - and then install the new woofer. No soldering would be required. It is very similar to this:
http://forum.ascendacoustics.com/sho...ons-with-video!