Results 1 to 3 of 3

Thread: Omnimount 20 with 170SE in horizontal position?

  1. #1
    Join Date
    Aug 2005
    Location
    Newport News, VA
    Posts
    13

    Default Omnimount 20 with 170SE in horizontal position?

    I may have to move my 170SE surrounds to a new location behind the couch, which would require them to be mounted high on the wall. I haven't used a wall mount before, so I have a couple of questions.

    When using the Omnimount 20's, can I rotate the 170SE into a horizontal position? In this orientation, how far would I be able to angle the speaker down towards the listening position? It looks like the mount itself is spec'd for +/- 30 degrees of tilt. Can I expect at least this much tilt?

  2. #2
    Join Date
    Aug 2003
    Location
    USA
    Posts
    5,645

    Default Re: Omnimount 20 with 170SE in horizontal position?

    Quote Originally Posted by LS1 Sounds View Post
    I may have to move my 170SE surrounds to a new location behind the couch, which would require them to be mounted high on the wall. I haven't used a wall mount before, so I have a couple of questions.

    When using the Omnimount 20's, can I rotate the 170SE into a horizontal position? In this orientation, how far would I be able to angle the speaker down towards the listening position? It looks like the mount itself is spec'd for +/- 30 degrees of tilt. Can I expect at least this much tilt?
    Hi LS1,

    Our sincere apologies for missing your post

    When using the Omnimount 20's, can I rotate the 170SE into a horizontal position? In this orientation, how far would I be able to angle the speaker down towards the listening position? It looks like the mount itself is spec'd for +/- 30 degrees of tilt. Can I expect at least this much tilt?
    Yes, as long as you fully tighten down the ball joint. In addition, you should be able to angle the speaker downward by as much as 30 degrees without issue.

    Hope this helps!
    .
    .
    .
    Good Sound To You!

    David Fabrikant
    www.ascendacoustics.com

  3. #3
    Join Date
    Aug 2005
    Location
    Newport News, VA
    Posts
    13

    Default Re: Omnimount 20 with 170SE in horizontal position?

    No problem Dave, thank you for the response!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •