Hi everyone,

I've had my ELX Ribbon's since July and I jsut want to make sure I'm getting the most out of them.

They are in my living room that is a trapezoidal shape. They are against a back interior wall that is about 27 feet long. They are about 10 feet apart and I am about 10-11 feet from each tweeter. The speakers are about 20" out from wall. Here is a rough design of the room with the speakers on the long flat wall and my listening position marked as the X. The speakers are not near any walls but they do surround a 2 foot high TV stand. The drivers are about 4 inches in front of the stand.

Here is a link to some photos as well. https://imgur.com/a/Rp6Kepo

I am running them with a Yamaha A-S2200 which posts there power specs as [20 Hz-20 kHz, 0.07% THD] 90 W ＋ 90 W (8 ohms), 150 W ＋ 150 W (4 ohms). I also have a 10ish year old SVS PB1000 sub integrated.

Would I benefit from a higher powered amp? I listen mainly between 60-75dB.


Just trying to make sure I get the most out of this investment. Would appreciate any advice, help.