I am curious if anyone else is experiencing an occasional (and sometimes more than occasional) flashing power light on their Rythmik Subwoofer? I was doing some room and speaker placement adjustments the other day and noticed something I had never noticed before – the power light on my Rythmik L12 was flashing/blinking sometimes. The original location of the L12 was between the 2 Towers and the power light was not easily visible from my listening position. The L12 settings were exactly as per Rythmik recommendations for music only (no HT). The volume dial in particular was never set past the 12 o'clock position. My research tells me (as did Rythmik) this is the limiter tripping. In an effort to stop this from happening, I set the volume on the L12 to a 9 o'clock position. While this had a mitigating effect on the flashing, I found a noticeable loss of lower frequency sound volume. When I set the volume on the L12 back up to 11 or 12 o'clock I am very happy with the sound I get, but the L12 flashes more frequently (especially on a bass heavy track or higher amplifier listening level). My foremost concern is damaging the L12. Has anyone else noticed their power light flashing (maybe at higher volumes or bass heavy tracks)?? It just seems odd to me that I would need to set the L12 to such a low volume setting to try and minimize this from happening.
Setup: (Sierra Tower w/RAAL, Rythmik L12, HK3490 120w, Schiit modi 3+, Amazon HD)