Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Do stands for 340's have wire management?

  1. #1
    Join Date
    Feb 2005
    Location
    Huntington, Indiana
    Posts
    146

    Question Do stands for 340's have wire management?

    I can't tell from the pictures. Do the Pedestal Stands for CMT-340 Mains have any sort of cable management feature built in or will the speaker wires be hanging loose down the back of the stands? Does anyone have any higher resolution pictures of the stands they could share?

    Thanks,

    Darren

  2. #2
    Join Date
    Jul 2004
    Location
    Birmingham, Alabama
    Posts
    462

    Default

    There is no wire management with the 340 stands. What I did was to get some Techflex and red and black heat shrink tubing to pretty up my speaker cable. That way I don't mind them showing. Check out this link. It's not my web site, but does have great pics and easy to follow instructions on how to make some DIY high end looking speaker cables. www.whatisrazar.com/speakercables
    - EVH III

  3. #3
    Join Date
    Dec 2003
    Location
    Syracuse, New York
    Posts
    1,222

    Default

    Thanks for the link, Eddie. I need another project like a hole in the head but a man's gotta do what a man's gotta do.

    David

  4. #4
    Join Date
    Feb 2005
    Location
    overland park, ks
    Posts
    70

    Default

    you could just stick on some wire clips, unless the backside will be in plain view.
    powdered toast man away!

  5. #5
    Join Date
    Feb 2005
    Location
    Huntington, Indiana
    Posts
    146

    Default

    That's the problem. The back of the speakers will be in plain view.

  6. #6
    Join Date
    Aug 2003
    Posts
    138

    Default

    Just drill two holes in them. Unless you have filled the stands with sand or shot, it won't be a problem.

    Another option would be to get some stick on wire ducts like this:

    http://cableorganizer.com/surface-ra.../latching.html

    I have never dealt with this place. They were the first ones I found with a decent picture. Home depot may even have this stuff.

    Derek

  7. #7
    Join Date
    Feb 2005
    Location
    Huntington, Indiana
    Posts
    146

    Default

    I have used similar conduit type products before for other cable runs. I will consider this type of solution if I can convince myself that it won't look too bad. I am trying to get away from the "college dorm-room" solutions of my past.

    I have another related question. Do the 340's have an up or down direction since the tweeter in in the center? The picture shows the binding posts on the back of the speaker pointing up. This would make it very difficult to make the wires look nice as the banana plugs would make the cable point up towards the ceiling and then the cable would have to make an arch and then travel down towards the floor. I would think this would look really bad.

    I really wish there were better pictures of everything on the website. If I am going to buy speakers unheard off the internet I would at least like to be able to look at some good resolution pictures of the products. This is not just a problem with this site. It seems to be a common problem with most of the online speaker companies websites. Sorry if I am voicing some frustration.

  8. #8
    Join Date
    Jan 2005
    Location
    St. Louis Area
    Posts
    123

    Default

    I agree with you on the pictures. There are not enough pictures of the speakers on the site.

    A member's gallery would also be great.

  9. #9
    Join Date
    Feb 2005
    Location
    Huntington, Indiana
    Posts
    146

    Default

    I apologize if my above post came off as too negative. I did not intend it to reflect on Ascend's customer service. I have sent several e-mails to Ascend and and in each case received prompt replies with the answers to my questions .

  10. #10
    Join Date
    Aug 2003
    Location
    USA
    Posts
    5,538

    Default

    Hi dae3dae3,

    I did not consider your posts negative at all so please don't feel any need to apologize...

    We will DEFINITELY have a members gallery VERY soon.. That is a promise!

    Regarding cable management on the 340 stands, I like to use adhesive cable ties. Home depot internet catalog number 300417

    Combined with these: Home depot internet catalog number: 16277646

    Work great!


    I have another related question. Do the 340's have an up or down direction since the tweeter in in the center? The picture shows the binding posts on the back of the speaker pointing up. This would make it very difficult to make the wires look nice as the banana plugs would make the cable point up towards the ceiling and then the cable would have to make an arch and then travel down towards the floor.
    Honestly, I have never seen a loudspeaker with binding posts facing downwards and there is a reason for this... Speaker cable can be heavy and if the binding posts were facing downward, gravity will certainly have an affect and I would suspect that the banana plugs would eventually be pulled free from the posts overtime. Imagine how annoying that would be, especially if the wire and the back of the speaker are hard to get to...

    Don't misunderstand me, I do fully understand your concern.. If you feel using banana plugs will look bad due to the cable making an arch, simply don't use banana plugs. Bare wire, pins, spades, lugs etc. can all be inserted from beneath the binding posts, in which case the cable will not have to make an arch. Actually, I use banana plugs whereby the cable can be inserted into the plug from the side.. thus not arching the cable either...

    Hope this helps out!
    Last edited by davef; 02-11-2005 at 06:37 PM.
    .
    .
    .
    Good Sound To You!

    David Fabrikant
    www.ascendacoustics.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •