Results 1 to 5 of 5

Thread: Help with Dirac and F12 settings

  1. #1
    Join Date
    Sep 2013
    Posts
    4

    Default Help with Dirac and F12 settings

    Hello,

    I would like to know using Dirac graphs. Could I pre-eq my subs and run Dirac again to improve the responses that I am getting.

    I've attached 4 images for 2 subs. Sub one with and with out target curve. Sub two with and with target curve.

    Recommendations and pointing me in the right direction will be greatly appreciated.
    sub2pic2.jpgsub2pic1.jpgSub1pic2.jpgsub1pic1.jpg

  2. #2
    Join Date
    Dec 2013
    Posts
    360

    Default Re: Help with Dirac and F12 settings

    When you say pre-eq do you mean using eq that's built into the subwoofer or something else? Dirac will only eq your sub once and as you can see from the graphs it has a maximum of 10db boost. You don't want to boost any more than that or you can push your subwoofer beyond it's capability.

  3. #3
    Join Date
    Sep 2013
    Posts
    4

    Default Re: Help with Dirac and F12 settings

    What I mean is to use the PEQ or other controls on the sub to boost or remove frequencies before running Dirac. For example, I am assuming for sub 2 I could either boost around 100hz or subtract from around 30hz on the subs PEQ to "smooth" things out before running Dirac.

  4. #4
    Join Date
    Dec 2016
    Location
    Central NC
    Posts
    132

    Default Re: Help with Dirac and F12 settings

    Quote Originally Posted by jpmazare View Post
    Hello,

    I would like to know using Dirac graphs. Could I pre-eq my subs and run Dirac again to improve the responses that I am getting.
    Can you? Yes. Should you? Probably.

    My understanding, limited as it may be, is that one will typically get a better result if one first uses programs like REW to find optimum placement for subs and get the best (flattest) frequency response one can before running a program like Audyssey or Dirac. This includes treating the room (bass traps), etc.

    Said another way, it's best to limit the amount of EQ that a program like Dirac or Audyssey has to perform.

    As a not very closely related example, I recently raised my surround speakers about 25cm. The reason was the high backed couch that is the main listening position, and to get my Sierra-1's woofers up so that they were line-of-site with my ears. Sounds goofy, I know. Most people will say to only worry about the tweeters, which were fine already.

    But what I was hearing was fairly strained. Tight, thin, whatever. Just didn't sound right. And when I raised the surround speakers up that 25cm or so, and then reran Audyssey, things got a lot better. Everything smoothed out, filled out, and that feeling of strain went away.

    My hypothesis for why is simply that Audyssey wasn't having to work so hard on those surrounds. After raising them up, they were giving my ears flatter frequency response to start with, so Audyssey was just doing touch up instead of major overhaul.
    "If it sounds good, it is good." -- Duke Ellington

  5. #5
    Join Date
    Mar 2006
    Posts
    17

    Default Re: Help with Dirac and F12 settings

    The output of your subs seem to be sub optimal.....meaning they roll off steeply early. Either

    1) they are not positioned properly
    2) their exist measurement errors- please ensure that the mic has an unobstructed view of the speakers and also there are no devices close behind or near to the measurement mic.
    3) the subs are damaged (not very likely)

    The sub could be moved around to optimize the uncorrected response. Failing that you could lower the overall level of the sub and other speakers to remove the dips where Dirac is unable to meet the target curve.

    Here are some links which might help.

    1)https://mehlau.net/audio/dirac-live-...ver/index.html
    2)https://mehlau.net/audio/dirac-live-mic-levels/
    3)https://www.dropbox.com/s/1i6xoa2717...0the%2088A.pdf
    4)https://www.dropbox.com/s/5cqu5yazjh...up%20Guide.pdf
    5)https://www.dropbox.com/s/y8udlbg22k...0Rev%202.1.pdf
    6)https://www.dropbox.com/s/zdhq72a1pu...%20Version.pdf

    Lots of links but the above by markus and AustinJerry are priceless.
    Last edited by kirky27; 07-30-2018 at 07:42 AM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •