Results 1 to 4 of 4

Thread: Setting up L12

  1. #1
    Join Date
    May 2009
    Posts
    25

    Default Setting up L12

    I just got the L12 for Christmas and just got around to setting it up yesterday. I’ve been out of the loop since 2014 when I bought the Sierra Towers and center channel. I have a Onkyo TX-SR608 but I don’t know if I’m setting the subwoofer correctly thru the setup menu on the receiver.. Any help would be appreciated.

  2. #2
    Join Date
    Mar 2004
    Location
    SouthWest of Cleveland
    Posts
    1,924

    Default Re: Setting up L12

    Have you run the auto setup(Audyssey)? That may set the speakers to large(full), in which case you'd want to manually set the sub to "Yes" and select a crossover setting for the speakers(Start with 80hz). Looks like it only goes 40hz then 80hz, etc.? Don't leave it set to Full/Large though as you won't be taking advantage of the sub.

    Hope this helps!
    Ed

    * Sierra-2EX's W/V2 crossover upgrade
    * (2) Rythmik F12's
    * Parasound Halo P6
    * Audio by Van Alstine DVA-M225 Monoblock Amps
    * MiniDSP 2x4HD For Sub calibration
    *World's Best Cables Canare 4S11 speaker cables

  3. #3
    Join Date
    May 2009
    Posts
    25

    Default Re: Setting up L12

    I ran audyssey and I have set the speakers to small and 80 hz. It’s some of the other adjustments in the receivers menu and the back of the sub. Thanks again Magneato.

  4. #4
    Join Date
    Dec 2013
    Posts
    360

    Default Re: Setting up L12

    Which settings, specifically, do you have questions about?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •