Results 1 to 6 of 6

Thread: CMT-340 Advice

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    May 2017
    Posts
    1

    Default CMT-340 Advice

    Looking for 100% HT/Blu-ray based speakers, here is what I am dealing with:

    Room is rectangular

    We sit against long wall, and HT is directly across on other long wall (about 11 feet away)

    The wall behind us, to the wall behind the display is 13 feet, and the long part of the room is 20 feet, with ceiling being around 13 feet. The two long walls are closed, and to the left us one of the short walls is closed, to the right there is no wall and it leaks out right into a kitchen and left into dining room, so our seating area is a rectangle, but the entire room is a "T" shape, with the kitchen and dining area being the top of the "T".

    I have a yamaha preamp to feed an Outlaw Model 7140 amp. I also have dual Rythmik FV15HP's. Was looking at going with two CMT-340's for the right and left fronts on the Ascend stands, on each side of my 65" display. Subs would be spread out beyond them because the room is so odd.

    I have a custom built riser for my display, and the CMT-340 center would go under it firing forward at our main two spots (as stated above, distance of our seats would be 11 feet from the center and fronts roughly and the fronts would be about 6.5 feet apart).

    How does that seem?

    Edit: I also prefer higher playback levels during movies, not moderate at all
    Last edited by gadgtfreek; 05-24-2017 at 03:10 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •