Re: Any concensus on good HTM 200 wall mounts?
Originally Posted by
KPFury
How did you mount them horizontally? The two mounting screw holes in the back of the speaker are both offset to one side
Horizontally it wasn't a problem with these mounts. It took me some time to find them but I researched this mount and the bracket provided is slotted the right size so it was a good fit for the two inserts. I was concerned since the inserts are offset that it wouldn't be balanced weight wise and could sag but the mount is strong enough. I also mounted mine into a beam for extra security during heavy bass scenes. I used them with the ascend inserts and provided screws. I was also able to tilt and swivel them exactly the same, locking the hex screws securely once I got the right placement. They haven't moved at all since installation. They mirror each other with the tweeter on the bottom just like I wanted and it worked beautifully without customizing anything.
However, if you wanted to mount them vertically with this kit you will most likely need to drill the cabinet and use strong corse wood screws or customize the optional vertical bracket.
IMG_1873.jpgIMG_1874.jpg
Last edited by eyecatcher; 01-11-2017 at 02:06 PM.
Ascend Sierra ELX Towers RAAL | Ascend Sierra ELX Horizon RAAL | Ascend HTM-200SE | Rythmik F15HP | Anthem D2v 3D | Parasound Halo A51 | Schiit Yggdrasil OG | OPPO 105D