Results 1 to 8 of 8

Thread: AV Receiver to go with Ascend setup (with RAAL ribbons)?

  1. #1
    Join Date
    Aug 2014
    Posts
    11

    Question AV Receiver to go with Ascend setup (with RAAL ribbons)?

    Hi there,

    I'm new to the forum and hope to place an order as soon as the staff holiday is over!

    I plan to purchase one of the following two receivers for a 5.1-channel setup where the front (Sierra Towers) and center channel (Horizon) speakers will feature the RAAL ribbon tweeters, and wanted to know if anyone has any experience with Ascend speakers and either the:

    1. Anthem MRX-710
    2. Denon AVR-4520ci

    Both appear to have excellent reviews and room correction features.

    I'm interested in opinions as if cost were not a factor (since I believe I can get them both for the same price).

    Is there a compelling reason anyone can think of to go with either over the other? Since I've never had speakers with ribbon tweeters before, are there any special considerations there?

    I am planning on getting either the F15HP or FV15HP subwoofer (unsure yet, since I expect to do 50/50 music/movies and have a 250-300 sq. ft. room with 8-foot ceilings). There is a small chance I'll go with two F15HP subs if I get one and deem it unsatisfactory (unlikely since I normally don't play at excessively high volume levels).

    Any thoughts are welcome. Thanks!

  2. #2
    Join Date
    Aug 2014
    Posts
    11

    Default Re: AV Receiver to go with Ascend setup (with RAAL ribbons)?

    Just to follow up, I decided to go with the Denon, since I was able to get a very good deal that made it a no-brainer. While I usually prefer no-frills equipment, it did have a few extra features I will use that the Anthem did not have. I'm very excited to try out the Audyssey XT32 room correction system as well - I welcome any advice from anyone else with experience using it with Ascend speakers!

  3. #3
    Join Date
    Aug 2014
    Location
    Pocatello, ID
    Posts
    110

    Default Re: AV Receiver to go with Ascend setup (with RAAL ribbons)?

    Denon is a solid choice, though I am unfamiliar with that specific unit. They also make the only HTIB that made me say, "Huh...that actually sounds pretty decent."

  4. #4
    Join Date
    Mar 2006
    Location
    Southeast of Cleveland
    Posts
    174

    Default Re: AV Receiver to go with Ascend setup (with RAAL ribbons)?

    I have the Denon 4520ci, it's their flagship model, and i love it!
    Jeff

  5. #5

    Default Re: AV Receiver to go with Ascend setup (with RAAL ribbons)?

    I'm looking at the Anthem MRX-710 also. Has anyone compared it to the Marantz AV8801 or Yamaha CX-5000 or xmc-1? I just need good 2ch music and 5.1 HT. I have beautiful speakers and amps

  6. #6
    Join Date
    Aug 2014
    Location
    Pocatello, ID
    Posts
    110

    Default Re: AV Receiver to go with Ascend setup (with RAAL ribbons)?

    The Emotiva XMC-1 is a pre-amp, not a receiver. Did you mean the Fusion 8100?

  7. #7

    Default Re: AV Receiver to go with Ascend setup (with RAAL ribbons)?

    i'm talking about using the xmc-1 with dirac. I don't really need a receiver. I'm aware I'm comparing a receiver which is the 710 to pre amps. I think it is that good. The fusion doesn't have any room correction.

  8. #8
    Join Date
    Aug 2014
    Location
    Pocatello, ID
    Posts
    110

    Default Re: AV Receiver to go with Ascend setup (with RAAL ribbons)?

    The XMC-1 users seem to be pretty happy about their Dirac room correction (which is finally, finally available on the XMC-1 as of mid-December). You can read more about their experiences here to help with your decision:
    http://emotivalounge.proboards.com/thread/38893?page=57

    I have considered getting an XMC-1 myself because:

    1. My current Emotiva pre-amp has flaky HDMI negotiation
    2. Emotiva fixed the HDMI problems and other flakiness, which plagued many (most?) small companies making custom HDMI products a few years ago.

    It doesn't hurt that I have "40% off any Emotiva pre-amp" card.
    The only reason I haven't (other than the remaining cost) is that the XMC-1 doesn't support HDMI 2.0. Thus, while it does support 4K TVs, it does not support them at 60Hz. Big deal? Only if I want to use a future 4K projector as a PC monitor. This is a remote possibility, but it seems unwise to buy a $2000 pre-amp in 2015 which doesn't support HDMI 2.0, regardless of Dirac support. I'm hoping they plan to release an updated version soon, but have zero evidence that such a thing is in the works.

    As an aside, the following video provides some evidence that room correction is not all that it is cracked up to be. The video discusses cinema, but some of the ideas may apply to home theater: http://youtu.be/6qZ3MWsOhvo

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •