Results 1 to 4 of 4

Thread: DIY Enclosures vs Parts Express

  1. #1
    Join Date
    Mar 2011
    Location
    NW Pennsylvania
    Posts
    696

    Default DIY Enclosures vs Parts Express

    What do you all think of this enclosure vs building one from scratch? The opening for the driver is the right size.

    http://www.parts-express.com/knock-d...subw--300-7078
    Nate

  2. #2
    Join Date
    Dec 2012
    Posts
    169

    Default Re: DIY Enclosures vs Parts Express

    Quote Originally Posted by natetg57 View Post
    What do you all think of this enclosure vs building one from scratch? The opening for the driver is the right size.

    http://www.parts-express.com/knock-d...subw--300-7078

    If you are planning to use this to build a 15 inch sealed rythmik, this could be a show stopper.

    The feet may be changed, but the height should not be reduced. Extra height is required if drivers
    are not recessed, so the clearance remains the same.
    from
    http://rythmikaudio.com/download/DS1500s_sub_plan.pdf

  3. #3
    Join Date
    Mar 2011
    Location
    NW Pennsylvania
    Posts
    696

    Default Re: DIY Enclosures vs Parts Express

    Quote Originally Posted by rsmt2000 View Post
    If you are planning to use this to build a 15 inch sealed rythmik, this could be a show stopper.



    from
    http://rythmikaudio.com/download/DS1500s_sub_plan.pdf
    I think that's for the downward firing plans
    Nate

  4. #4
    Join Date
    Mar 2011
    Posts
    1

    Default Re: DIY Enclosures vs Parts Express

    Just seeing this but I emailed Brian about those enclosures a few months ago and he said either the 3cu. (E15 clone) or 4 cu. (F15) would be fine as long as the driver and baffle cuts work. Hope this helps.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •