Results 1 to 9 of 9

Thread: CBM 170 SE Run Full Range

  1. #1
    Join Date
    Feb 2011
    Posts
    133

    Default CBM 170 SE Run Full Range

    Hi Ascend friends,

    Will I damage the CBMs if I run them full range (or as Large)?

    Daniel

  2. #2
    Join Date
    Mar 2011
    Location
    NW Pennsylvania
    Posts
    697

    Default Re: CBM 170 SE Run Full Range

    Probably not. You should be careful though running them full range with room correction software engaged. The software will try to over boost lower frequencies and that could damage your speakers at loud volumes.

  3. #3
    Join Date
    Nov 2011
    Location
    Space Coast, FL
    Posts
    578

    Default Re: CBM 170 SE Run Full Range

    Hi Daniel,

    Good to hear from ya again. Hope you are doing well.

    I have a pair of 170 SE in my bedroom that I run full-range for music and the occasional movie on the laptop. No problems whatsoever. My bedroom is just under 1,000 cubic feet and typical listening levels are between 40 dB and 80 dB 6-8 feet away.

    The 170 SE woofers are quite robust and the speaker itself can handle a fair amount of power. I do agree with natetg57. Check that the RCS is not artificially boosting low-end response. Otherwise, you should be OK. Just turn it down if you start hearing any mechanical distress. That's the speaker telling you it's near the limit.
    -Jacob

  4. #4
    Join Date
    Aug 2003
    Location
    USA
    Posts
    5,563

    Default Re: CBM 170 SE Run Full Range

    Quote Originally Posted by sonicboom View Post
    Hi Ascend friends,

    Will I damage the CBMs if I run them full range (or as Large)?

    Daniel
    Dark Ranger's response is 100% accurate

    I have several pairs of 170's that I run full range nearly every day. No issues at all, provided that your receiver is not artificially boosting the low end response.
    .
    .
    .
    Good Sound To You!

    David Fabrikant
    www.ascendacoustics.com

  5. #5
    Join Date
    Feb 2011
    Posts
    133

    Default Re: CBM 170 SE Run Full Range

    Thanks very much for the replies. I have Audyssey ON. Does it boost low end response?

  6. #6
    Join Date
    Feb 2011
    Posts
    133

    Default Re: CBM 170 SE Run Full Range

    Just one more question please. How about a crossover of 40Hz? Will the speakers be safe even with auto-EQ on? Thank you very much.

  7. #7
    Join Date
    Aug 2003
    Location
    USA
    Posts
    5,563

    Default Re: CBM 170 SE Run Full Range

    Quote Originally Posted by sonicboom View Post
    Thanks very much for the replies. I have Audyssey ON. Does it boost low end response?
    it certainly can, but just how much depends on your environment.

    Quote Originally Posted by sonicboom View Post
    Just one more question please. How about a crossover of 40Hz? Will the speakers be safe even with auto-EQ on? Thank you very much.
    Yes... Don't worry about this too much. The woofers in the 170's are quite robust. Rule of thumb, if you hear mechanical distress from the woofers, turn the volume down.
    .
    .
    .
    Good Sound To You!

    David Fabrikant
    www.ascendacoustics.com

  8. #8
    Join Date
    Feb 2011
    Posts
    133

    Default Re: CBM 170 SE Run Full Range

    Thanks very much, David.

    I do not listen really loud, and at my listening levels in my environment, the 170s are just awesome. I have 340s too. Great speakers.

    Daniel
    Maui, Hawaii

  9. #9
    Join Date
    Aug 2003
    Location
    USA
    Posts
    5,563

    Default Re: CBM 170 SE Run Full Range

    Quote Originally Posted by sonicboom View Post
    Thanks very much, David.

    I do not listen really loud, and at my listening levels in my environment, the 170s are just awesome. I have 340s too. Great speakers.

    Daniel
    Maui, Hawaii
    Excellent -- glad to hear that you are enjoying them
    .
    .
    .
    Good Sound To You!

    David Fabrikant
    www.ascendacoustics.com

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •