Originally Posted by
Too_Blue
Hi Dave,
After talking to you on the phone the other day, I think I've got this proposed Sierra 1 / F-15 2.1 channel setup figured out:
Sierra 1 run full range using Q-Plug "A", low-pass crossover handled by Rythmik using low-level in from DAC L/R out (it also has balanced outputs which are active simultaneously, those will drive the UPA-1 amps). This won't give me a high pass for the speaks, but the Q-Plugs sort of do that anyway.
So, as a starting point at least, I would set the variable crossover to 60hz, the extension filter to "14" with "hi" damping, and the low-pass to "ext/12" with rumble filter "off"?
The "ext/12" setting is what will give me the 12dB/octave slope to match the roll off of the Sierra 1 with the plug?