Results 1 to 5 of 5

Thread: FS: Bamboo (Plyboo) Speaker Stands

  1. #1
    Join Date
    Mar 2009
    Posts
    21

    Default FS: Bamboo (Plyboo) Speaker Stands

    This listing is for a trio of custom Plyboo (bamboo ply) speaker stands built by Ascend/AVS forum member Jason Coleman to match Ascend Sierra-1 speakers in natural bamboo finish. I had to sell off my Ascend Speakers for $$ reasons, so these are a bit out of place with my Rosenut Energy speakers now.

    Included are two 24" stands for the L/R speakers, one 12" center channel stand, GR research brass spikes, screws and assembly instructions, and BluStik. The center channel stand has an 8 degree angle so the center can be angled up toward the listener. The top plates were cut to match the footprint of each speaker - the top plate of the center channel stand matches the size of the horizontal Sierra-1 center.

    I bought these in May, and have only assembled the L/R stands (see pics). The center stand is still wrapped in bubble wrap. I rate 8/10 since the L/R have been assembled, and there is a small ding on the column of one of the stands.

    I can disassemble the stands and ship at the buyers expense. Local pickup is also fine with payment prior to pickup. I will accept USPS money order or Paypal.

    EDIT: SOLD!
    Last edited by alphaiii; 11-24-2009 at 07:25 PM.

  2. #2
    Join Date
    Mar 2009
    Posts
    21

    Default Re: FS: Bamboo (Plyboo) Speaker Stands

    The fine details:

    As I mentioned, they're made of Bamboo ply. It's non-resonant, heavy and sturdy. IMO, it's a lot more durable than MDF. Unfortunately, it's expensive - I priced it at around $300 for a 4x8 sheet.

    The top plate dimensions for the L/R stands - 7.5" wide x 10.5" deep, with (I believe) a 3/8" radius on front edge - perfect match for the footprint of the Sierra monitor.

    The top plate for the center stand is 14.25" wide x 10.5" deep to match the horizontal Sierra center.

    The columns for all 3 stands are 6" x 6", and are sand fill-able, as the bottom of the column is sealed. The column for the center stand has an 8 degree cut on the top to angle the top plate upward.

    The bottom plates for all 3 stands are 10" x 12".

  3. #3
    Join Date
    Mar 2009
    Posts
    21

    Default Re: FS: Bamboo (Plyboo) Speaker Stands

    And a few pics...
    Attached Images Attached Images

  4. #4
    Join Date
    Apr 2009
    Location
    Texas
    Posts
    5

    Default Re: FS: Bamboo (Plyboo) Speaker Stands

    Do you know how much shipping would be to the 76262 area or 75709?
    CBHerman
    cbherman@gmail.com

    Proud owner of 5 Dark Cherry Gloss Sierra 1s

  5. #5
    Join Date
    Mar 2009
    Posts
    21

    Default Re: FS: Bamboo (Plyboo) Speaker Stands

    Sold!
    Last edited by alphaiii; 11-24-2009 at 07:24 PM.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •