What subwoofer(s) are you matching with your Ascends?

[Sam AV]

Now that my Ascends (340SEs in front and 170SEs in rear) are on the UPS truck headed my way I thought I should start working towards a sub. What are you matching with your Ascends?

My room is about 5200 CF and I've been leaning towards the SVS PB12-NSD or HSU VTF3-MKIII. Is anyone using one of these?

[Gov]

Mirage Omni S12, love it!

[mziegler]

I have the Hsu VTF3-MKII. It works great with the 340SE. Now that I have moved to the Sierra, however, I'm not so sure it keeps up, and I am thinking of upgrading the sub.

[curtis]

VTF-3MK3 crossed at 60hz.....I am happy with it, but better sound quality is always welcome.

[BradJudy]

I'm using an ACI Titan XL (won it in a raffle - great sub) with Sierra's crossed at 60Hz.

[Mag_Neato]

I have a Rythmik Audio DS-12 (Direct-Servo 12") sub in a 2Cu.ft. sealed enclosure crossed at 60Hz to my Sierras. It is a very tight and musical sub that goes deep. If you don't mind a bit of assembly it is highly recommended.

[Pilk]

I have a Rythmik Audio DS-12 (Direct-Servo 12") sub in a 2Cu.ft. sealed enclosure crossed at 60Hz to my Sierras. It is a very tight and musical sub that goes deep. If you don't mind a bit of assembly it is highly recommended.

Did you build your own box? I am torn between two DS1500 kits or a MFW15 which I already have on order. The advantage to the DIY is that I can conceal them in a cabinet under the main L/R speakers. I also have considered the DS12 kits but for $40 more total you can get the 15's and I have room for 3.5 cuft boxes. I also considered the dual MFW15 which would reside prominently in the family room, but that ran into serious WAF, almost violent WAF! So, I've considered the DIY for the best possible SQ and looks.

[tank418]

HSU STF-3 love it ! but cant wait for dave's sub !!!!!!

[MichaelG]

I have the Hsu VTF3-MKII as well. Very happy until I'm able to ascend to a better one.

[Mag_Neato]

Did you build your own box? I am torn between two DS1500 kits or a MFW15 which I already have on order. The advantage to the DIY is that I can conceal them in a cabinet under the main L/R speakers. I also have considered the DS12 kits but for $40 more total you can get the 15's and I have room for 3.5 cuft boxes. I also considered the dual MFW15 which would reside prominently in the family room, but that ran into serious WAF, almost violent WAF! So, I've considered the DIY for the best possible SQ and looks.

I had RAW Acoustics in B.C. construct the box and ship it to me. I installed the driver, amp and polyfil. I did not have the time, equipment or patience to build one myself.