Results 1 to 10 of 15

Thread: Subwoofer connection question

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Apr 2005
    Location
    wisconsin
    Posts
    7

    Default Subwoofer connection question

    First off, let me say that I've had a pair of b-stock 170s for almost a year now and I love them. Right now I've got them cramped in a little bedroom on the sides of a tiny tv, but I'll be giving them some more room to breath and setting them along side a 30 inch hdtv when I move to a new apartment in a few months.

    I hope this is the right place to ask this question (it's not specifically about ascend speakers). I have a HK-3480 stereo receiver and I'm hoping to get b-stock a Hsu Stf-1 sub. I've been wondering what the best way to connect the two is. I don't really know a ton about audio, but I do alot of research. I know that the most popular way to connect the sub would be to use an rca cable to the sub output on the receiver. If I do this, is there a way to set the crossover on the receiver? If I set the crossover on the subwoofer does that mean that it will only recieve the lower frequencies and still send the full range of frequencies to my 170s? What would be the difference in connecting the speakers to the sub rather than the reciever? Since they probably wont be very close to each other, are the longer speaker connections worth it?

    Thanks, I hope my rambling made sense, let me know if you need anymore details or specifics

  2. #2
    Join Date
    Dec 2005
    Posts
    22

    Default

    You are right, the preferred method is to connect the sub using the line level RCA sub output of the receiver. This makes it easier to blend the mains and sub using the receivers crossover and level adjustments. Unfortunately, the HK-3480 does not feature an adjustable crossover, so your mains will always be full-range when connected like this.

    Since the 170's aren't full-range speakers, I would connect the line level speaker outputs of your receiver to the sub, then from the sub to your speakers. This will let you use the sub's crossover to limit the frequencies sent to your mains.

  3. #3
    Join Date
    Apr 2005
    Location
    wisconsin
    Posts
    7

    Default

    Thanks for the reply. So you're saying that with my receiver, I would have to run speaker wires from the reciever to the sub and a second set from the from the sub to the speakers? I'll have to figure out a good place to hide all the wires.

  4. #4
    Join Date
    Apr 2005
    Location
    wisconsin
    Posts
    7

    Default

    I noticed Hsu is pretty emphatic about only using the speaker connections of the sub if there is no sub out on the receiver, they even printed it on the back of the sub itself. Why is this? Is the crossover on the sub of a lesser quality than a reciever would have? Does anyone have their ascends hooked up through a subwoofer? Also, since I am currently sending all frequencies to my 170s, what will using the sub out sound like? Is there an undesired sound quality of having the speakers and the sub overlap a little on the lower sounds?

  5. #5
    Join Date
    Mar 2004
    Location
    SouthWest of Cleveland
    Posts
    1,927

    Default

    If the STF-1 is like my PSB, the speaker connections only keep the higher frequencies from the sub, in my case 80hz and above, but pass a full range signal through to the speakers. So, the speakers still receive a full range signal. Not the prefered method, but there if it is your only option. Hsu does make filters you can use to bypass this, and you can select the filter settings when ordering. It's $100 I think.
    Ed

    * Sierra-2EX's W/V2 crossover upgrade
    * (2) Rythmik F12's
    * Parasound Halo P6
    * Audio by Van Alstine DVA-M225 Monoblock Amps
    * MiniDSP 2x4HD For Sub calibration
    *World's Best Cables Canare 4S11 speaker cables

  6. #6
    Join Date
    Apr 2005
    Location
    wisconsin
    Posts
    7

    Default

    Thanks for the info. I'm definately starting to realize how little I know about this subject. So, since my reciever has no crossover, I have to consider how to limit the lows going to the speakers AND the highs going to the sub? I guess my main dilema is price. I like the sound of my system now. Although it does lack bass, I was hoping the stf1 would give me a better overall sound at a great price. Adding another hundred dollars or so is not something I want to do unless its really necessary.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •