-
**** in the house
I never thought I'd say this, but I bought a pair of B0SE (WB-3) and they are fantastic. Ok, before I get kicked off the forum I better quit messing around. The WB-3 is a mounting kit for the 201s/301s which I used to mount my HTM-200s.
The kit contains two matching 1.5" X 5" metal plates that lock together such that the plates are parallel and offset by about 7/16". They fit together kind of like a locked hinge, it's hard to describe, I'll try to load pictures later. I think it's an excellent "flush" mount (7/16" from wall) and not terribly expensive at $20.
The B0SE name does not appear on the brackets so once the packing material is thrown away nobody will know, except for all of you now.
P.S. the HTM-200s are everything they are not hyped to be.
edit: who filtered B0SE? :)
-
1 Attachment(s)
Re: **** in the house
iirc...Dave mentioned a similar locking device over in the Stats thread looking like this. Likely only a couple of bucks...I'm using something similar I picked up in the picture/ mirror section at my local Home Depot for my 200se.
Attachment 1310
http://forum.ascendacoustics.com/sho...3569#post53569
My solution>
http://www.homedepot.com/p/OOK-Inter...-100058856-_-N
-
4 Attachment(s)
Re: **** in the house
Yep, either of those would work too but I really like the design of the B0SE brackets and would buy the kit again for $20 delivered to my front door (Amazon Prime). Here are the pics: