Dave Please Confirm S1 crossover connections

I conducted a S1 to S2 upgrade a couple years back. I am repurposing S1 speakers and crossover into an outdoor cabinet (TIC ASP120) whose components bit the dust.

The crossover outputs are labeled TW+ & TW- (black/red wires) and LS+ & LS- (brown/black wires). Will try to attach a pic.

Please confirm TW is for tweeter and LS is for woofer, thanks.

M. Salcedo

Attachment 1764
Original ASP-120 outdoor speaker

Attachment 1765
Comparison of ASP and Ascend X-Overs

Attachment 1766
Ascend X-Over Installed in ASP-120

Attachment 1767
Ascend Sierra 1 drivers installed in ASP-120 enclosure.

SQ testing resulted in closing the port (it is too small) with a foam plug to create a sealed speaker.
As a sealed speaker the SQ is very good, they are now in use in our bedroom ! :)

Quote:

---

Originally Posted by XEagleDriver

I conducted a S1 to S2 upgrade a couple years back. I am repurposing S1 speakers and crossover into an outdoor cabinet (TIC ASP120) whose components bit the dust.

The crossover outputs are labeled TW+ & TW- (black/red wires) and LS+ & LS- (brown/black wires). Will try to attach a pic.

Please confirm TW is for tweeter and LS is for woofer, thanks.

M. Salcedo

---

TW represents the tweeter outputs, LS represents the woofer outputs. Hope this helps!

Sure did, please see post #2 for pics and results.
XEagleDriver