1 Attachment(s)
Re: Sierra-2 Upgrade instructions with video!
Quote:
Originally Posted by
brasewel
I'm seriously contemplating getting the upgrade kit. I bought my Sierra-1s used from someone else with the NRT upgrade. I'm hoping I don't have to make any modifications. I have the Piano black so would hate to scuff it up.
Do you guys take back the old tweeters, crossover and drivers?
Yes -- we still do take back the old parts for some credit. However, this program will expire soon.
See the attached document for pricing info.
2 Attachment(s)
Re: Sierra-2 Upgrade instructions with video!
Quote:
Originally Posted by
brasewel
I'm seriously contemplating getting the upgrade kit. I bought my Sierra-1s used from someone else with the NRT upgrade. I'm hoping I don't have to make any modifications. I have the Piano black so would hate to scuff it up.
Do you guys take back the old tweeters, crossover and drivers?
Hey!
I did just the same thing! My NrTs were bought used, and I then bought the upgrade kit. It's easy to install and totally worth it
Attachment 1103
Re: Sierra-2 Upgrade instructions with video!
Quote:
Originally Posted by
davef
Yes -- we still do take back the old parts for some credit. However, this program will expire soon.
See the attached document for pricing info.
Noticed the pricing has gone up since this was posted. Does this mean the old parts credit is no longer valid as well? Was contemplating upgrading my NrTs soon.
Re: Sierra-2 Upgrade instructions with video!
Quote:
Originally Posted by
RandomName
Noticed the pricing has gone up since this was posted. Does this mean the old parts credit is no longer valid as well? Was contemplating upgrading my NrTs soon.
We are presently still taking back the old parts.
Re: Sierra-2 Upgrade instructions with video!
This just sounds so sexy....lol
I have the older Sierra1 cabinets myself, I know cuz I've been in there, and saw the black mesh.....don't ask why, it's a secret....to everyone but my neighbors...and my bloodied nephew! ;)
I don't foresee an issue if I do this though, I have tools and some skillz.
Still lovin' my Original Sierras though, just busted them out after a 2 year hiatus, and they sound fabulous, so this will have to wait!
Re: Sierra-2 Upgrade instructions with video!
Quote:
Originally Posted by
Mag_Neato
Sorry to hear that. I feel your pain. I added some scuff marks around the woofer openings on my natural cabinets. Not overly noticeable but it was aggravating when it happened. I just recently put the grilles on, having spent the majority of the last 7 years in the shipping box. Can't see the scuffs now!
As for sanding: before starting that procedure it is advisable to remove the tweeter, crossover and insulation. Vacuum/wipe the cabinets when the operation is finished.
How did you expand the hole? I'm just getting back to this project after have the parts here for a few months and need about 1/16" more woofer reveal. Would blue painter's tape mask off well enough for me to use my Dremel or should I pay a woodworker to router it out?
Re: Sierra-2 Upgrade instructions with video!
Quote:
Originally Posted by
Quinn
How did you expand the hole? I'm just getting back to this project after have the parts here for a few months and need about 1/16" more woofer reveal. Would blue painter's tape mask off well enough for me to use my Dremel or should I pay a woodworker to router it out?
I started with some sandpaper by hand, then switched to one of these: http://www.homedepot.com/p/Proxxon-1...8985/203459839
The wheel actually created a taper of the opening so the woofer flange fit in the top of the opening but not all the way down. I ended up carving out the remainder with a utility knife. Not the best way to do it but I was impatient and aggravated so nothing was going to stop me. The wheel was the culprit for the scuffs, or maybe it was my inability to control it!
I used a hand drill, but if you have a drill press you could simply set the depth and move the cabinet around the wheel. Should be able to control the motion better that way.
Edit: The wheel I linked to is similar to the one I meant to reference, which is used with a rotary drill.
Re: Sierra-2 Upgrade instructions with video!
I used a Dremel with the sandpaper disk, worked really great. I just followed around the woofer opening without much pressure and it only took a few minutes per cabinet.
Re: Sierra-2 Upgrade instructions with video!
There you go! I do not own a Dremel(Darn pricey little attachments), but if you have one already it sounds like a no brainer.
Jeff, I just realized I brought my -2's over your place in October. Sheesh....time flies!
Re: Sierra-2 Upgrade instructions with video!
Fantastic, thank you for sharing that.