Dimension of Tower for AT Screen

Hello! Can someone tell me what the height is to the bottom of the bottom woofer, from the ground?

I've decided to get a pair of tower for my L/R in home theater, and will be placing it behind an AT screen. As I build the frame for the screen I need to make sure:

a) the bottom horizontal bar of screen does not go across the any of the woofers, and if they do, then
b) build a sand-filled stand on top of the stage to raise the towers a bit.

Assumption: A frame across the bottom part of tower (below the woofers) is ok and would not interfere with the sound field. Please advice if it would and I should change design.

The screen bar will be approx. 16 inches from the stage (which is 8 inches high). Going for bottom of screen being 24 inches off ground.


Thanks!

I measured 19.5" from the floor to the bottom of the lower woofer. This measurement is without the spikes installed. The spikes would add another 1" or so.

Quote:

---

Originally Posted by Jack1949

I measured 19.5" from the floor to the bottom of the lower woofer. This measurement is without the spikes installed. The spikes would add another 1" or so.

---

Thank you!