Dimension of Tower for AT Screen
Hello! Can someone tell me what the height is to the bottom of the bottom woofer, from the ground?
I've decided to get a pair of tower for my L/R in home theater, and will be placing it behind an AT screen. As I build the frame for the screen I need to make sure:
a) the bottom horizontal bar of screen does not go across the any of the woofers, and if they do, then
b) build a sand-filled stand on top of the stage to raise the towers a bit.
Assumption: A frame across the bottom part of tower (below the woofers) is ok and would not interfere with the sound field. Please advice if it would and I should change design.
The screen bar will be approx. 16 inches from the stage (which is 8 inches high). Going for bottom of screen being 24 inches off ground.
Thanks!
Re: Dimension of Tower for AT Screen
I measured 19.5" from the floor to the bottom of the lower woofer. This measurement is without the spikes installed. The spikes would add another 1" or so.
Re: Dimension of Tower for AT Screen
Quote:
Originally Posted by
Jack1949
I measured 19.5" from the floor to the bottom of the lower woofer. This measurement is without the spikes installed. The spikes would add another 1" or so.
Thank you!