CBM-170SE as rear surround speakers with Sierra-1's in front?
Appreciate input on how good a sound match would result by adding a pair of CBM-170SE as rears in home theater surround system with my current Sierra-1's (orig) in front along with subwoofer. Thanks!
Re: CBM-170SE as rear surround speakers with Sierra-1's in front?
Quote:
Originally Posted by
BarryG
Appreciate input on how good a sound match would result by adding a pair of CBM-170SE as rears in home theater surround system with my current Sierra-1's (orig) in front along with subwoofer. Thanks!
Hi BarryG,
I had this same set-up - LCR Sierra 1s, CBM-170SE as rear surrounds, and a subwoofer - for several years. In my experience, the CBM-170SE are very good speakers in this arrangement. I did use my NAD AVR's Dirac Live to make phase, distance and level adjustments, but I would have done so even if I had used two more Sierra-1s as surround speakers. Later I added a Sierra Horizon with RAAL and it still sounded great in combination with the Sierra-1 LR and the CBM-170s.
In short, no need to worry about matching - it would sound great.
Re: CBM-170SE as rear surround speakers with Sierra-1's in front?
Quote:
Originally Posted by
BarryG
Appreciate input on how good a sound match would result by adding a pair of CBM-170SE as rears in home theater surround system with my current Sierra-1's (orig) in front along with subwoofer. Thanks!
Sound match is excellent, you can go with either our CBM-170's or our HTM-200's as surrounds. For nearly a decade, this was our most popular system (Sierra-1 fronts + 170 surrounds)
Hope this helps and please feel free to reach out directly.
Re: CBM-170SE as rear surround speakers with Sierra-1's in front?
Is there a good wall mount bracket that I can screw into a single vertical wall stud and has a horizontal arm that I can screw into the threaded inserts on the back of the CBM-170SE?
The best I can come up with is something like this: https://www.amazon.com/DAGCUXIN-Univ.../dp/B0B6JQNJ6S - I would then fashion a horizontal mounting arm from 1.5in x 1/8" thick aluminum flat bar stock and screw it to the CBM-170SE threaded inserts and to the wall mount. Comments?
(I am assuming there are two threaded inserts oriented horizontally on the back of the CBM-170SE)
1 Attachment(s)
Re: CBM-170SE as rear surround speakers with Sierra-1's in front?
Quote:
Originally Posted by
BarryG
Is there a good wall mount bracket that I can screw into a single vertical wall stud and has a horizontal arm that I can screw into the threaded inserts on the back of the CBM-170SE?
The best I can come up with is something like this:
https://www.amazon.com/DAGCUXIN-Univ.../dp/B0B6JQNJ6S - I would then fashion a horizontal mounting arm from 1.5in x 1/8" thick aluminum flat bar stock and screw it to the CBM-170SE threaded inserts and to the wall mount. Comments?
(I am assuming there are two threaded inserts oriented horizontally on the back of the CBM-170SE)
Hi Barry,
The mount you linked to is actually the exact mount we recommend for both our 170's and 200's :)
The latest version of the 170SE cabinet has a single threaded insert on the back:
Attachment 2693
Re: CBM-170SE as rear surround speakers with Sierra-1's in front?
I am getting the 170SEs as rear surrounds
and the posted mounts are no longer available ?
Any other recommendations ?
For total system, I have settled on 340 SE fronts and 170 SEs rears with a TBD sub.
Speaking of
I am getting the tower stands for the front left/right
and good recommendations for the front center horizontally positioned 340 SE.
I am building out a 13x16 old school den ( not media room)
and going against the grain by deciding against a 120 projector and getting a 98 or 100 TV
as the room will be used more like an everyday gathering place with bright lights often ((daily TV, daily sports and night movies) vs a dedicated light controlled media room used primarily for movies and sports (been there done that as well.)
And I decided against the UST projectors as well
having had a projector
I dont think I would enjoy the always immersive experience of a 120 screen
for all viewing activities !!!!
All that said
. I think I will have 5.1 channels of audio covered well
and eventually I will add 2 in ceiling speakers.
Re: CBM-170SE as rear surround speakers with Sierra-1's in front?
Quote:
Originally Posted by
rperry96
the posted mounts are no longer available ? Any other recommendations ?
I think these are the same mounts: https://www.amazon.com/gp/product/B09QJZWPQW
fwiw, I like the mounts but the included molly bolts were garbage and I provided my own
Re: CBM-170SE as rear surround speakers with Sierra-1's in front?
Quote:
Originally Posted by
BarryG
Yes, these are the exact same wall mounts.
Re: CBM-170SE as rear surround speakers with Sierra-1's in front?
Quote:
Originally Posted by
davef
Yes, these are the exact same wall mounts.
Thanks
I just placed my order for these.
Re: CBM-170SE as rear surround speakers with Sierra-1's in front?
This will sound awesome. I've used this exact system.
