Crossover for CBM 170/340C/170 etc.
I have a 7.1 setup of CBM 170 L/R 340 Center, HTM 200 SL/SR and CBM 170 RSL/RSR with a newly acquired Rythmik LV12R.
All speakers are set to small and with the crossover at each speaker at 80hz, I was wondering if I should go a lil lower on the center as Audyssey set it 40hz?
I'm using this setup for 90% movies/TV.
Re: Crossover for CBM 170/340C/170 etc.
With a sub, I see no reason to go much below 80 hz. You could try as low as 60 hz to see if it sounds better to you. Better to let the sub handle the low frequencies, IMO.
I am surprised Audyssey set the center that low. Where'd it set the other channels?
Re: Crossover for CBM 170/340C/170 etc.
When I had a 340 center Audyssey usually selected 40hz for the crossover. I usually bumped it up to 60.
Re: Crossover for CBM 170/340C/170 etc.
Quote:
Originally Posted by
racrawford65
I am surprised Audyssey set the center that low. Where'd it set the other channels?
thank you, I watched Fury Road last night and was very happy with what I heard. Audyssey set everything else at 60hz
Re: Crossover for CBM 170/340C/170 etc.
Quote:
Originally Posted by
la3288
I have a 7.1 setup of CBM 170 L/R 340 Center, HTM 200 SL/SR and CBM 170 RSL/RSR with a newly acquired Rythmik LV12R.
All speakers are set to small and with the crossover at each speaker at 80hz, I was wondering if I should go a lil lower on the center as Audyssey set it 40hz?
I'm using this setup for 90% movies/TV.
For CMT-340's - I recommend a crossover range between 60-80Hz. Audyssey rarely gets this right.
Re: Crossover for CBM 170/340C/170 etc.
Quote:
Originally Posted by
la3288
thank you, I watched Fury Road last night and was very happy with what I heard. Audyssey set everything else at 60hz
I thought I'd like a 60hz crossover with my Sierra-1/2s and pair of Rythmik L12s, but I got a lot more punch/impact from the crossover being set at 80hz. Some of it depends on the room. It's easy to switch it all to 80hz and compare yourself.
Re: Crossover for CBM 170/340C/170 etc.
80hz and Small has been the tried and true for bass management. If anything you could try to raise it to 90hz and free up a little horsepower in your AVR. You could experiment with that. It's not waisting your speakers by any means as some claim by setting it at 80 or 90hz no matter what speakers you have but I definitely wouldn't go lower than 80. Just my opinion.
Re: essay writing service lrx
Quote:
Originally Posted by
RidgePi
Our
essay writing service provides a full-scale writing assistance accessible online 24/7.
Apart from many other writing companies, we are rather picky when forming a professional staff of experts.
Please troll elsewhere
Re: essay writing service lrx
Audyssey doesn’t choose where the crossover is at, the manufacturer (or engineer) of the receiver does that based on what Audyssey measured. Due to people not liking their tower speakers labeled as “small” and/or them not playing below 80Hz, the manufacturer decides to often label speakers as large and to give as much extension as possible.
As long as you have a good subwoofer with good transient response, like a Rythmik sub for example, then it should be set to small with an 80 hz crossover. In my living room I have an almost 20 year old Outlaw sub. It sounds a bit better with a 50 to 60 Hz crossover to my CMT 340 mains. The bass sounds a slight bit more sluggish with the higher crossover. If I had a Rythmik sub, like I have in my theater room, I’d simply choose an 80 Hz crossover with the CMT 340s.