Printable View
I'm currently running a pair of original Sierra-1's with Emotiva subwoofer. I'd like to add a center and rears for HT. I'm thinking to go with CMT-340SE2 pair in the rear. What would you advise for the center, CMT-340SE2 or Sierra-1? (any other advice also welcomed)
Also, am I correct in assuming Ascend has dropped the gorgeous Cherry finish in the Sierra line?
Honestly I'd just go Sierra-1s all the way around. If budget is a big concern then I'd get a Sierra-1 center and probably get HTM-200s for surrounds.
As for cherry, you can get the Sierras in Satin Dark Cherry. If, however, you're talking about the old Light Cherry Gloss, then nope, those are long gone. It's a shame, as I have a pair of those and besides being fingerprint magnets, they're gorgeous. I've upgraded them every time possible, S1s to S2s to S2EXs to LXs.
I had Sierra-1 as my LCR for several years. Very pleased. Had CBM -170SE for rears and that was a great combination. Direct quote from Dave:Quote:
Originally Posted by BarryG
"For nearly a decade, this was our most popular system (Sierra-1 fronts + 170 surrounds)"
https://forum.ascendacoustics.com/sh...a-1-s-in-front
Dave also says HTM-200s would work in that same thread.
Hope this helps!
If the surrounds would be wall mounted I’d recommend the HTM 200s. If they are not going to be wall mounted then I’d recommend the CBM 170s. Unless one wants to spend the extra money for surrounds in the Sierra line. If if they are very far away then maybe step up to something with more output. I’ve been very happy with the HTM 200s as surrounds in 2 different rooms. One with SE series up front and the other with Sierra series up front. Very good match in either case.
Any comments on DUO V2 LCR center versus Sierra-1 center paired with my Sierra-1 L/R?
Between these two, I would recommend Sierra-1 center.Quote:
Originally Posted by BarryG
Can you (or anyone) say more about why HTM-200SE over CBM-170SE for back wall mounted surrounds?Quote:
Originally Posted by N Boros
Is there a wall mount recommended for the HTM-200SE?
Also, for the Sierra-1 center placed beneath the screen, where should the speaker be placed horizontally relative to the center line of the screen? Should I center the tweeter axis or just center the Sierra cabinet as a whole?
If wall mounting (e.g. flush or close to flush with the wall), the HTM's, IMO, would be the best choice as they don't have a rear port. With the CBM's, you'd need to space them out from the wall a bit (at least equal to the diameter of the rear port).
As to a wall mount for the HTM's, you could use a picture hanger and picture hanging wire. Wrap the wire around the 2 screws in the threaded inserts and then hang. I had mine mounted this way for some time.
Alternately, you could use something like this. (But I'd try to find one that's rated for more than 10 lbs.)
https://www.amazon.com/VideoSecu-Uni...s%2C248&sr=8-6
I use something like in the following link for my HTM200s (as heights in an Atmos center) and my S2 surrounds.
https://www.amazon.com/TNP-Dual-Book...zcF9hdGY&psc=1
As to the S1 as center, I'd center the cabinet on the screen center line. Mainly for aesthetics. I don't think one way would be better than the other from an audibility standpoint.
HTM-200SE are simply easier to wall mount (smaller and lighter)Quote:
Originally Posted by BarryG
For the Sierra-1 center, it really doesn't matter. With the tweeter only a few inches more to the left or more to the right won't make any audible differences. That stated, I generally recommend centering the cabinet.
Hope this helps!
Satin Dark Cherry is available, and isn't going anywhere. It is our 2nd most popular finish :)Quote:
Originally Posted by BarryG