PDA

View Full Version : I bi-wired my CMT-340's!!



X52
01-17-2004, 01:17 AM
Well as long as it looks cool. :-)

JH

curtis
01-18-2004, 11:30 AM
Some of you asked for pics:

Here are the parts:
http://www.thechangs.us/cableparts.JPG

Finished speaker end of the cable:
http://www.thechangs.us/finished_cable.JPG

Plugged in to the speaker:
http://www.thechangs.us/plugged_in.JPG

-curtis

ez-v
01-18-2004, 03:22 PM
Cool looking wire you got there, Curtis!

Bighitter
01-19-2004, 12:09 AM
If you don't mind where did you get the cable and how much did it run you? I believe that particular wire is CL3 rated correct?

curtis
01-19-2004, 12:43 AM
I am not sure if it is CL3 rated. I got it from www.markertek.com for 69cents/ft.

Total cost for my front three speakers, 2x10' and 1x7', was less than $70.....the cable, techflex, shrink wrap, banana plugs.

-curtis

Bighitter
01-19-2004, 02:04 AM
If nothing else atleast they make everything look nice. Now I just need to verify if they are CL3 or not, thanks for the info.

BradJudy
01-19-2004, 04:36 AM
Bighitter, I doubt it is as CL3 isn't mentioned on the Canare site nor is it printed on the cable itself (I use 4S8 for speaker cable).

Bighitter
01-19-2004, 05:21 AM
Well thanks for the info, guess I will still have to go with the sound king wire.